Foam Injection Background

Foam Injection in Henderson & East Texas

Non-Invasive Lifting for Concrete and Slabs.

Foam Injection Done Right

At Jac-It House Leveling & Foundation Repair LLC, we specialize in high-density polyurethane foam injection to lift and stabilize settling concrete. With over 25 years of hands-on experience, our team carefully inspects the slab to identify voids and settlement before they become major problems. We use state-of-the-art equipment to inject expanding foam under the concrete, providing a fast, clean, and permanent solution.

Our approach combines efficiency and craftsmanship. From drilling the injection ports to pumping the foam and monitoring the lift, every step is handled with precision. We also address underlying issues, including moisture and drainage, to prevent future damage.

Serving homeowners across East Texas, we take pride in delivering results that stand the test of time. When it comes to foam injection, trust Jac-It to protect your home and provide lasting peace of mind.

How it Works

We drill small, penny-sized holes into the sunken concrete and inject a high-density structural foam. As the foam expands, it fills voids, compacts the soil, and gently lifts the slab back to level. The result: a stable, level surface with minimal disruption to your yard or home.

Schedule Free Inspection
Foam Injection

Common Problems Solved by Foam Injection

When a concrete slab settles, the effects are visible from the inside out. Many homes across East Texas, from older properties in Longview to historic houses in Marshall, experience shifting slabs due to our expansive clay soils. Here are the most common issues we solve with foam injection:

  • Sinking concrete driveways, patios, and walkways
  • Uneven garage floors
  • Pool deck settling
  • Voids under the slab causing hollow sounds when you walk
  • Minor structural settlement that hasn't yet caused wall cracks
  • Sloping interior floors

Why East Texas Slabs Struggle

The soil is where East Texas weather does its quiet damage. Around Lufkin and Tyler, heavy rainfall and a high water table can leave water perched under a house for days. Expansive clay soil swells when wet and shrinks when dry, putting immense pressure on foundations and causing slabs to crack and settle unevenly.

When the soil shrinks, it leaves voids under the concrete. The slab then bridges those gaps, eventually cracking under the weight of the house. Foam injection is ideal for these situations because the expanding foam fills those gaps and compacts the loose soil, restoring support immediately.

Our Foam Injection Process

  • Free inspection, including a thorough check of the interior floors, exterior grading, and the concrete slab itself.
  • Elevation readings across the floors to map exactly how much the slab has settled.
  • Drilling injection ports: small, 5/8-inch holes are drilled through the concrete at specific points.
  • Foam injection: high-density polyurethane foam is pumped under the slab.
  • Monitoring the lift: we watch elevation readings closely as the foam expands and lifts the concrete.
  • Finishing: the injection holes are patched with cement, leaving a nearly invisible repair.

What Drives Foam Injection Cost

Foam injection cost is shaped mostly by what we find during the inspection. A small driveway that just needs a little lift is a much lighter job than a whole home slab that has settled. The written estimate breaks the work out so you can see where the effort goes.

  • Total square footage of the concrete being lifted
  • How far the slab has settled — more lift requires more foam
  • Accessibility of the area for the injection equipment
  • Whether the void under the slab is shallow or deep
  • If drainage or other moisture control is needed to protect the repair

When Foam Injection Makes Sense

Foam injection is the right fix when concrete has settled or sunk due to soil erosion or voids. One real advantage of foam injection is that it is incredibly fast and non-invasive—there is no need for heavy equipment that tears up your landscaping, and you can often use the surface again the same day.

It is not the answer for everything. Deep structural settlement on a home's foundation may require press piers. And if the soil is washing away due to poor drainage, injecting foam without correcting the water issue will eventually lead to new settlement. We would rather tell you that up front than sell you a repair that does not last.

Foam Injection Across Henderson and East Texas

Jac-It has done foundation repair and foam injection out of Henderson for more than 25 years, from rural acreage homes in Rusk County to historic houses in Nacogdoches, Marshall and Palestine and boom-era homes in Longview and Kilgore. We also work Tyler, Lufkin, Jacksonville, Livingston and Huntsville. Call 430-352-6085 or 1-877-65-JACIT for a free inspection.

Answering Your Questions

Foam injection is a method used to lift and stabilize sunken concrete by injecting expanding high-density polyurethane foam underneath it. It fills voids and compacts the soil, raising the concrete back to level.
Common signs include uneven or sinking driveways, patios, and walkways, or a hollow sound when walking across the concrete. It's also used for minor interior floor settlement.
Foam injection is very fast. Most residential projects are completed in just a few hours, and you can often walk on or drive over the surface immediately after the injection holes are patched.
Mudjacking uses a heavy cement slurry that can be messy and adds significant weight under the slab. Foam injection uses a lightweight, expanding polyurethane that doesn't degrade, doesn't wash away, and requires much smaller injection holes.
Yes. The expanding foam is highly effective at lifting slabs back to their original position. We monitor the lift closely with elevation readings to ensure a smooth, level result.
Absolutely. We provide a detailed inspection and clear estimate, so you understand exactly where the voids are and how much lift is needed before any work begins.
Cost depends on the square footage, how much the concrete has settled, and how much foam is required. It is generally more affordable than replacing the concrete entirely. We provide a free inspection and written estimate.
No. The high-density polyurethane foam we use is structural-grade and designed to be permanent. It does not shrink, rot, or wash away with water.
Yes, foam injection can be used for interior slabs. However, if the home has experienced deep structural settlement, we may recommend press piers instead. We will determine the best approach during the inspection.